Co?N graphene encapsulated cobalt catalyst for H2O2 decomposition under acidic conditions

Hydrogen peroxide (H₂O₂) has been listed as one of the 100 most important chemicals in the world. However, huge amount of residual H₂O₂ is hard to timely decomposed into O₂ and H₂O under acidic condition, easily resulting in explosion hazard. Here, we reported a core–shell structure catalyst, that is graphene with Co N structure encapsulated Co nanoparticles. Co N graphene shell serves as the active site for the H₂O₂ decomposition, and Co core further enhance this decomposition. Benefiting from it, the H₂O₂ decomposition were close to 100% after 6 cycles without pH adjustment, which increased 6 orders of magnitude compared with no catalyst. At the same time, the O₂ generation reached 99.67% in 2 h with little metal leaching, and ·OH has been greatly inhibited to only 0.08%. This work can cleanly remove H₂O₂ with little deep oxidation and protect the process of H₂O₂ utilization to achieve a safer world.     

基于Massive MIMO及频谱叠加的5G SA网络上行优化方法

大规模多输入多输出(Multiple-Input Multiple-Output, MIMO)可以有效提升5G SA网络的上行链路数据传输速率以及可靠性。针对5G SA网络上行链路速率和覆盖不均衡的情况,提出了基于大规模MIMO的分组算法,将发送信号矢量进行分组,组内采用最大似然检测,组外采用基于正交三角分解(QR分解)的干扰消除检测,并且结合5G频谱的叠加策略,在降低算法复杂度的同时,有效提升网络覆盖和速率。通过5G SA现网实测,通过MIMO降低分组数量能够提升分组检测性能,结合上行低频段频谱叠加策略能够有效提升5G SA网络上行覆盖30%,提升5G SA网络上行平均速率40%~80%,特别是弱覆盖边缘的网络速率,最高可达600%。     

Analytical approach on magnetohydrodynamic Casson fluid flow past a stretching sheet via Adomian decomposition method

Flow phenomena of three-dimensional conducting Casson fluid through a stretching sheet are proposed in the present investigation with the impact of the magnetic parameter in a permeable medium. The adaptation of particular transformations is useful to modify the governing equations into their nondimensional as well as the ordinary form. However, these transformed equations are nonlinear and approximate analytical methods for the solution of the complex form of governing equations. In particular, the Adomian decomposition method is proposed for the solution. The behavior of several variables, such as the magnetic and porous matrix, on the flow profile as well as the rate of shear stress, are discussed via graphs and tables. The conformity of the current result with the earlier study shows a road map for further investigation. The major concluding remarks are; the retardation in the velocity distribution is rendered due to an increase in the Casson parameter moreover, the Casson parameter favors in reducing the rate of shear stress coefficient in magnitude.     

Coal char gasification for co-production of fuel gas and methane decomposition catalysts

Partial gasification of coal char was conducted with addition of metal oxides for co-production of fuel gas and methane decomposition catalysts. Effect of the metal composition (Ni, Co and Fe based mono- or bi-metals) was investigated on the fuel gas production and the resultant catalyst surface and textural properties, morphology and performance in catalytic methane decomposition (CMD). Besides H₂-rich fuel gas production (the combustion energy up to 11.03–23.42 MJ/kg_char) from the gasification, the gasification residue can directly serve as the effective and efficient catalyst for CMD. The Fe and Fe–Co composite oxides were found to be better among the mono- and bi-metallic oxides for the fuel gas production during the gasification, respectively. The Ni-based mono-/bi-metallic catalysts could display high and stable methane conversion (up to 80%) during the 600-min CMD test at 850 °C. Promotional role of the second metal in CMD was discussed on the carbon diffusion, metal mobility and reducibility, formation and growth of the deposited carbons. The formed carbon morphology after CMD was analyzed based on the Kirkendall effect and Tammann temperature and further correlated to the potential catalyst deactivation.     

A customized low-rank prior model for structured cartoon–texture image decomposition

The mathematical characterization of the texture component plays an instrumental role in image decomposition. In this paper, we are concerned with a low-rank texture prior based cartoon–texture image decomposition model, which utilizes a total variation norm and a global nuclear norm to characterize the cartoon and texture components, respectively. It is promising that our decomposition model is not only extremely simple, but also works perfectly for globally well-patterned images in the sense that the model can recover cleaner texture (or details) than the other novel models. Moreover, such a model can be easily reformulated as a separable convex optimization problem, thereby enjoying a splitting nature so that we can employ a partially parallel splitting method (PPSM) to solve it efficiently. A series of numerical experiments on image restoration demonstrate that PPSM can recover slightly higher quality images than some existing algorithms in terms of taking less iterations or computing time in many cases.     

Strong tribocatalysis of strontium titanate nanofibers through harvesting friction energy for dye decomposition

Friction is a common clean energy and can be harvested and converted into electricity energy via triboelectricity, which can electrochemically drive dye decomposition in theory. In this work, the tribocatalytic Rhodamine B dye decomposition has been experimentally realized in strontium titanate (SrTiO₃) nanofibers, which are synthesized via a hydrothermal method. In the tribocatalytic dye decomposition process, the friction is exerted in the interface between catalyst surface and a polytetrafluoroethylene (PTFE) Teflon rod setup with the different stirring speed. The RhB dye decomposition ratios of SrTiO₃ nanofibers at these stirring speeds of 200 rpm, 400 rpm, 600 rpm, and 800 rpm are respectively 24.2%, 51.8%, 73.9% and 88.6%, yielding to these reaction rate constants of ～0.0112 h^?1, ～0.0260 h^?1, ～0.0562 h^?1 and ～0.0877 h^?1. The main active species, which play an important role in tribocatalytic process, are the superoxide radicals and holes on basis of the active species quenching experiment results. The excellent tribocatalysis activity makes SrTiO₃ nanofibers potential for application in dye wastewater treatment through utilizing the environmental friction energy.     

Effect of electric field intensity on domain kinetics of Pb(Mg1/3Nb2/3)O3–0.38PbTiO3 single crystal

As one of the outstanding piezoelectric materials, relaxor-PbTiO₃ single crystal also exhibits promising electro-optic and nonlinear-optic properties. Therefore, it is vital to understand the domain switching kinetics not only for optimizing strain-mediated devices performance but also for fabricating optical waveguides and periodic domain structures in optical applications. In this work, domain switching kinetics in annealed and pre-poled PMN-0.38PT single crystal under different external electric field were studied. Polarization reversal can be accomplished only by c-domain nucleation and growth in the annealed sample where the formation of the ferroelastic domains is hindered. In pre-poled sample, 90° domain switching happened by 90° domain wall reorientation under low electric field while 180° domain switching is accomplished by two-step 90° domain switching and c-domain growth under high electric field. The results are important for modulating domain structure for strain mediated and optical devices.     

Studies on spinel cobaltites,MCo2O4 (M = Mn,Zn, Fe,Ni and Co) and their functional properties

Optimization of electrodes for charge storage with appropriate processing conditions places significant challenges in the developments for high performance charge storage devices. In this article, metal cobaltite spinels of formula MCo₂O₄ (where M = Mn, Zn, Fe, Ni and Co) are synthesized by oxalate decomposition method followed by calcination at three typical temperatures, viz. 350, 550, and 750 °C and examined their performance variation when used as anodes in lithium ion batteries. Phase and structure of the materials are studied by powder x-ray diffraction (XRD) technique. Single phase MnCo2O4,ZnCo2O4 and Co3O4 are obtained for all different temperatures 350 °C, 550 °C and 750 °C; whereas FeCo₂O₄ and NiCo₂O₄ contained their constituent binary phases even after repeated calcination. Morphologies of the materials are studied via scanning electron microscopy (SEM): needle-shaped particles of MnCo₂O₄ and ZnCo₂O₄, submicron sized particles of FeCo₂O₄ and agglomerated submicron particle of NiCo₂O₄ are observed. Galvanostatic cycling has been conducted in the voltage range 0.005–3.0 V vs. Li at a current density of 60 mA g^?1 up to 50 cycles to study their Li storage capabilities. Highest observed charge capacities are: MnCo₂O₄ – 365 mA h g^?1 (750 °C); ZnCo₂O₄ – 516 mA h g^?1 (550 °C); FeCo₂O₄ – 480 mA h g^?1 (550 °C); NiCo₂O₄ – 384 mA h g^?1 (750 °C); and Co₃O₄ – 675 mA h g^?1 (350 °C). The Co₃O₄ showed the highest reversible capacity of 675 mA h g^?1; the NiO present in NiCo₂O₄ acts as a buffer layer that results in improved cycling stability; the ZnCo₂O₄ with long needle-like shows good cycling stability.     

基于改进奇异值分解滤波和谱峭度的滚动轴承故障诊断

针对含噪信号的有效奇异值个数难以确定的问题，提出了一种改进的奇异值分解降噪方法--奇异值累积法。该方法通过计算奇异值的实际下降值与奇异值平均下降速度累积量的差值，并取该差值最大值点的位置作为有效奇异值的分界点来确定有效奇异值的个数。在此基础上，提出了一种基于奇异值累积法与快速谱峭度的滚动轴承故障诊断方法。采用奇异值累积法对原信号进行降噪处理，然后利用快速谱峭度确定滤波器中心频率及带宽，通过分析频段包络谱中明显的频率成分来诊断故障。该方法可以有效去除信号中的噪声，使得到的峭度值所反映的故障冲击更接近实际情况。对含内圈、外圈故障的滚动轴承实验数据进行分析，实验结果表明，相比快速谱峭度的故障诊断方法，该方法具有更好的故障识别效果。     

Adomian decomposition method for the MHD flow of a viscous fluid with the influence of dissipative heat energy

An investigation is carried out on the effect of dissipative heat energy on the flow of an electrically conducting viscous fluid past a shrinking sheet. Both viscous and Joule dissipation effects are considered along with heat generation/absorption for the enhancement of heat transfer properties. The governing nonlinear coupled partial differential equations are transformed into nonlinear ordinary differential equations by a suitable choice of similarity transformations. However, the complex transformed equations are solved by an approximate analytical method known as the Adomian decomposition method with a suitable initial guess solution assumed from the known initial conditions. Moreover, the behavior of several parameters characterizing the flow phenomena are studied via graphs and the numerical computations for the engineering coefficients are obtained and presented through tables. However, the major outcomes of the results are that a higher suction is required to resist the fluid temperature and sinks as well as the dissipative heat energy favors enhancing the fluid temperature at all points in the flow domain.